Energy

Washington, D.C. – Following an announcement that the White House and House Speaker Kevin McCarthy (R-CA) had reached a deal to avoid default on U.S. debt, National Association of Manufacturers President and CEO Jay Timmons released the following statement:

“Manufacturers congratulate President Biden, Speaker McCarthy and their negotiating teams on reaching an agreement to lift the debt limit. As we have said from the beginning, defaulting on our debt would create economic chaos, harming manufacturing workers and their families and jeopardizing our leadership in the world. Congress should act quickly to pass this agreement and to demonstrate to Americans and to the world the continued strength of our institutions and our democracy.

“Manufacturers have been a leading voice for permitting reform, so we are encouraged that this legislation takes critical steps to improve our broken permitting system, helping us more fully leverage our domestic energy sources and expand manufacturing in the United States. We will work with Congress and the administration to build on this progress and create a comprehensive bipartisan permitting reform package that also helps unlock the full potential of laws meant to encourage the growth of manufacturing in America, such as the historic infrastructure law and the CHIPS and Science Act.

“Once this debate is behind us, our leaders must turn their focus to other policies critical to unleashing manufacturing’s full potential: addressing the crushing regulatory burden facing manufacturers, improving our immigration system and ensuring that our tax code supports manufacturing in America by encouraging investments in innovation and capital equipment.”

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.90 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

Washington, D.C. –  A new report conducted by Oxford Economics and commissioned by the National Association of Manufacturers warns that the Environmental Protection Agency’s proposed air quality regulations for particulate matter (PM2.5) are projected to threaten $162.4 billion to $197.4 billion of economic activity and put 852,100 to 973,900 current jobs at risk, both directly from manufacturing and indirectly from supply chain spending. In addition, growth in restricted areas may be constrained, limiting investment and expansion over the coming years. Due to these limited opportunities for expansion or investment, these areas in nonattainment could lose out on an additional $138.4 billion in output and 501,000 jobs through 2027.

Overall, the regulations could make it extraordinarily difficult to create new manufacturing jobs and protect existing manufacturing jobs in areas out of attainment. The regulations could also prevent much needed infrastructure improvements in these areas. This is because compliance with the regulations could require restricting manufacturing operations, resulting in fewer jobs, less investment and higher costs for consumers and families.

“Improving air quality in the U.S. is a top priority for manufacturers, and we’ve worked for years to make progress in delivering some of the cleanest manufacturing processes in the world,” said NAM President and CEO Jay Timmons. “This analysis makes clear these new regulations will weaken our ability to invest in the technology and processes that would continue to reduce emissions—while jeopardizing high-paying manufacturing jobs. We need to let manufacturers do what they do best: innovate and deploy modern technologies to protect the environment, while creating jobs and strengthening the economy.”

Key Findings:

• The regulations create a total economic exposure of $87.4 billion for manufacturing economic activity, equal to 2.4% of the U.S. manufacturing sector’s gross value added.
• The number of manufacturing jobs associated with this exposed activity is 311,600, or 1.9% of all U.S. manufacturing employment.
• Manufacturing in the U.S. exposed to the proposed standard supports between $75 billion and $110 billion in GDP and between 540,500 and 662,300 jobs in the U.S. through supply chain spending.
• Due to limits on expansion and investment, the proposed rule would put at risk approximately $138.4 billion of gross value added (in 2021 prices) and 501,000 jobs in 2027 in areas of nonattainment.
• Under the proposed rule, 200 counties could be placed out of attainment.
• California’s manufacturing sector will be most exposed, followed by Michigan and Illinois.
• Manufacturing operations in the U.S. are environmentally cleaner than the global average.

Find the latest information on the NAM’s efforts to oppose top-down air regulations, including statements from manufacturing leaders, here.

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.90 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

Washington, D.C. – The National Association of Manufacturers has announced Brandon Farris as its new vice president of energy and resources policy.

“Brandon joins the NAM at a pivotal time in our country and for our industry,” said NAM President and CEO Jay Timmons. “Manufacturers across the United States face regulatory challenges that affect their ability to do what they do best: transform and deploy modern technologies to protect the environment, while creating jobs and strengthening the economy. Commonsense regulatory and permitting reform, along with energy security, are needed now more than ever. Brandon’s experience and expertise will help manufacturers accomplish these critical goals.”

Before joining the NAM, Farris was the head of federal government relations for The Chemours Company, where he played an integral role in securing passage of the AIM Act, designed to phase out refrigerants that contribute to climate change. He worked closely with the NAM to help secure bipartisan ratification of the Kigali Amendment to the Montreal Protocol during the 117th Congress. Along with these and other major legislative accomplishments, he was honored as a 2022 top lobbyist by the National Institute for Lobbying & Ethics.

Previously, Farris served as assistant general counsel for Arkema as well as senior counsel for government relations for the Saudi Basic Industries Corporation. After serving in the Marine Corps Reserve, he began his career in Washington as a Bryce Harlow Foundation Fellow at the George Washington University School of Law while working on the U.S. House Agriculture Committee.

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.81 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

Washington, DC – In advance of today’s scheduled vote in the U.S. House of Representatives on H.R. 1, the Lower Energy Costs Act, National Association of Manufacturers President and CEO Jay Timmons released the following statement:

“America’s economy, our institutions and our values are being challenged by threats from around the world, which means now is the time to strengthen our energy security and expand domestic manufacturing—both to reduce our dependence on bad actors and to ensure we can support our allies. This bipartisan action to modernize permitting reform would help us achieve these goals by speeding up critical energy, infrastructure and manufacturing investments while we continue our commitment to environmental stewardship,” said Timmons. “I am in Europe right now, witnessing firsthand the consequences of being overly reliant on a country like Russia for energy. In the 21st century, there’s no excuse for letting job-creating projects languish for years to get bureaucratic approval. The Lower Energy Costs Act will bolster manufacturers’ competitiveness in America while also bringing relief to American families and businesses. We thank Speaker McCarthy, Majority Leader Scalise and Majority Whip Emmer for designating this bill as their top priority and for their focus on ensuring our industry can continue providing the leadership our country and our world need.”

Background: In the NAM’s latest Manufacturers’ Outlook Survey, more than 74% of respondents said that permitting reform—which would simplify and speed up the approval process for new projects—would be helpful to their manufacturing company, allowing them to hire more workers, expand their business or increase wages and benefits.

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.81 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org

London, U.K. – As the National Association of Manufacturers’ Competing to Win Tour begins its second week of bolstering strategic alliances across Europe, the association released findings from its Q1 2023 Manufacturers’ Outlook Survey. The survey found that expanding trading opportunities with Europe is a top priority for manufacturers, with more than 77% of respondents supporting negotiating new agreements with European nations.

“At a time when democracy and free enterprise are under attack from forces around the world, America can provide the leadership needed to defend our values, our institutions and our way of life,” said NAM President and CEO Jay Timmons. “By advancing an ambitious trade agreement agenda, we can ensure that the U.S.—and not competitors like China—writes the rules for the global economy and trading system. That has been the focus of our conversations with government, association and business leaders across Europe over the past week.”

The survey also continues to illustrate the need for Washington to enact policies that support the sector’s competitiveness as businesses face record job openings and increased production and input costs.

“With geopolitical turmoil and a banking crisis injecting further uncertainty into the economy, policymakers must act with urgency on key tax, trade, permitting and regulatory proposals if they want to help manufacturers in America fend off a recession,” said Timmons.

Background: Manufacturers have called on Congress and the White House to address key tax, trade, and permitting policies in recent months and have pressed lawmakers to work across the aisle to move legislation. The NAM conducted the survey from Feb. 21 to March 7, 2023.

Key Findings:

• Of companies that are engaged in international trade, nearly two-thirds of manufacturers said that Europe was either a somewhat or very important market for their company. With that in mind, 77.7% would support U.S. efforts to launch market-opening trade agreement negotiations with countries in Europe.
• Nearly three-quarters of respondents (74.9%) listed attracting and retaining a quality workforce as a primary business challenge, with increased raw material prices (60.1%) and supply chain challenges (55.8%) the next biggest impediments.
• More than 90% of respondents said that higher tax burdens on manufacturing income would make it difficult for their companies to expand their workforce, invest in new equipment or expand their facilities. Similarly, 93.9% suggest that increased regulatory burdens would weaken their ability to invest in their workers, equipment or facilities.
• More than 74% of respondents said that permitting reform—which would simplify and speed up the approval process for new projects—would be helpful to their manufacturing company, allowing them to hire more workers, expand their business or increase wages and benefits.
• More than 55% of respondents said that new proposed air standards from the Environmental Protection Agency would raise their costs of compliance, with roughly one-third suggesting that it would lead to increased permitting challenges and lessen investment and facility expansion plans.

Conducted by NAM Chief Economist Chad Moutray, the Manufacturers’ Outlook Survey has surveyed the association’s membership of 14,000 manufacturers of all sizes on a quarterly basis for the past 25 years to gain insight into their economic outlook, hiring and investment decisions and business concerns.

The NAM releases these results to the public each quarter. Further information on the survey is available here.

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.81 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

The Biden administration has given its approval of the Willow oil-drilling project in Alaska, reports The Wall Street Journal (subscription).

The gist: “The green light means Houston-based ConocoPhillips can start construction on its roughly $7 billion project in Alaska’s National Petroleum Reserve, which the company expects will produce about 180,000 barrels of oil a day at its peak—equivalent to about 40% of Alaska’s current crude production.”

• “The Interior Department said it would allow drilling on three of the five drill sites proposed by ConocoPhillips, which announced the Willow discovery in 2017.”

The NAM’s take: The NAM expressed its support of the project to the administration last summer, pointing out that while manufacturers make full use of renewable energy sources, they also need oil and gas.

• “Manufacturers know that we must continue developing reliable sources of American energy and can do that in a way that still allows us to achieve critical environmental goals,” said NAM President and CEO Jay Timmons today.
• “The Willow project is one such opportunity, which is why we advocated for its approval. Projects like this strengthen manufacturing’s competitiveness and are essential to bolstering domestic supply chains and job creation.”

NAM in action: The NAM has long been a vocal supporter of enacting permitting reform and making way for large-scale energy and infrastructure projects. Below, you can watch Timmons discuss the importance of overhauling the system during his 2023 State of Manufacturing Address:

The last word:  Timmons recently hammered home the need for reform in a message to several U.S. House committees, saying, “Some of the biggest obstacles preventing manufacturers—and therefore the entire American economy—from reaching our full potential are the permitting delays, red tape and complicated bureaucracy that have plagued us for decades.”

NAM President and CEO Jay Timmons has been making the most of his time on the road during the Competing to Win Tour, delivering a strong message to congressional leaders about top manufacturing priorities. He did so again yesterday on permitting reform with congressional leaders in Washington:

• “Some of the biggest obstacles preventing manufacturers—and therefore the entire American economy—from reaching our full potential are the permitting delays, red tape and complicated bureaucracy that have plagued us for decades,” he told the leadership of several House committees.

He went on to cite a number of different areas in which permitting reform is desperately needed, including . . .

Energy: Permitting reform is crucial to almost every sector of energy manufacturing, from oil and gas all the way to nuclear and clean energy technologies.

• “For example,” Timmons noted, “the siting of and infrastructure for hydrogen power generation and transportation and for advanced, small modular and micro-nuclear reactors have progressed far too slowly.”
• “Manufacturers depend on access to reliable and affordable energy to expand, which is why we support reforms that would foster transparent, streamlined and timely federal regulatory processes for the siting, permitting and licensing of energy delivery infrastructure of all types,” he continued.

Transportation: Manufacturers also need railroads, highways, airports and ports to run their operations and get their products out the door.

• “Yet obtaining permit approvals for these projects often takes years, especially when reviews are piecemeal and duplicative,” Timmons pointed out. “[M]any companies are waiting on the sidelines because transportation infrastructure construction moves too slowly—or not at all.”
• “To ensure the broad and beneficial impact of [the bipartisan Infrastructure Investment and Jobs Act of 2021] … it is critical to clear permit backlogs and ease processing timelines,” he said.

Resource development: Manufacturers prioritize sustainability, Timmons noted, but “restricting access to America’s abundant natural resources hinders our ability to strengthen domestic supply chains.”

• “The inconsistent administration of critical mineral policies, for example, has limited our ability to use a wide range of resources that lie on and beneath federal lands—resources that are critical to producing everything from cars to medical devices,” he added.
• “Streamlining resource permitting and leasing policies will help stabilize manufacturing supply chains, control costs for consumers, reduce our reliance on foreign countries and create jobs in the U.S.”

Environmental standards: Manufacturers have worked steadily to improve U.S. air quality, helping to “lead our country to the cleanest air in the modern world,” said Timmons.

• “Unfortunately, when federal agencies continually revise standards before current standards are met and before states have implemented prior mandates, they create unpredictability”—which may mean that new manufacturing facilities get built in other countries instead, where they don’t face as rigorous standards.
• However, if Congress makes regulations more predictable and consolidates review processes, the U.S. “can continue to build on its strong record of environmental stewardship by boosting domestic manufacturing, which is environmentally cleaner than international competitors,” Timmons concluded.

Congressional intent: Congress should make sure that permitting reform isn’t just passed, but also implemented as easily as possible, Timmons advocated.

• It should conform to “on recent and future statutory streamlining efforts such as One Federal Decision,” while making sure federal agencies don’t duplicate each other’s efforts and waste time.

The last word: “Permitting affects every aspect of our lives—from our economic security to our national security,” said Timmons. “[I]f we seize this opportunity to lead, there is no limit to what manufacturers in the United States can accomplish—for the good of our people and for the good of the world.”

Presented by Jay Timmons, President and CEO of the National Association of Manufacturers, the 2023 State of Manufacturing Address was given from Husco International in Waukesha, Wisconsin. Special remarks were given by Kurt Bauer, President and CEO, Wisconsin Manufacturers & Commerce. Special thanks to Husco President and CEO Austin Ramirez and his team for hosting this year’s address.

Read the official remarks here.

We’re hitting the road. This year’s NAM State of Manufacturing Address officially kicked off the 2023 leg of the NAM’s Competing to Win Tour. The tour will continue to spotlight the industry’s rapid transformation, while also focusing on manufacturing’s well-paying careers, diverse workforce and real-world solutions for the industry’s continued growth.

Upcoming stops: Waukesha and Pewaukee, Wisconsin (Tue, Feb 21); Fishers, Indiana (Wed, Feb 22); Harahan and Avery Island, Louisiana (Thurs, Feb 23)

VISIT THE COMPETING TO WIN AGENDA

Manufacturers have long led the way in efforts to reduce air pollution and improve air quality. Yet, new proposed regulations from the federal government will work against these efforts instead of bolstering them, stymying critical progress and destabilizing economic growth at a time when both are more important than ever.

The challenge: The Environmental Protection Agency is considering a new rule that would impose stricter air standards on particulate matter known as PM2.5 (i.e., particles that measure two and a half micrometers or less in diameter). This rule would enact significant top-down restrictions, forcing manufacturers to change their operations abruptly and without any support.

The reality: For years, manufacturers across all sectors have been developing smart, innovative ways to use energy, water and other resources more sustainably—all while boosting economic growth and creating good jobs at the same time.

• Today, manufacturing in the U.S. is cleaner and greener than at any other time in history, largely due to a revolution in how manufacturers produce, use and recycle energy and resources.
• Across the board, levels of major pollutants have declined dramatically over the past few decades. Thanks to existing regulations and a culture of innovation, the U.S. is far outpacing global competitors in environmental stewardship.

By the numbers: According to the EPA, the U.S. reduced six common pollutants covered by National Ambient Air Quality Standards, including PM2.5, by 78% between 1970 and 2020. In fact, PM2.5 levels alone have dropped a full 44% since 2000.

The impact: These new regulations could be devastating for manufacturers and for the climate. Here are just a few of the negative repercussions:

• An additional regulatory burden on businesses will drain resources from innovative manufacturers, posing additional hurdles to the investment in research and development that fuels progress in energy efficiency and climate action.
• Making permitting harder could also jeopardize new clean energy projects that America needs to address climate change.
• The standards will hinder onshoring, resulting in continued manufacturing abroad—which is less clean than manufacturing in the U.S. The EPA’s proposal undercuts U.S. competitiveness and will not further the goal of global emissions reduction.
• New regulations could damage an already-slowing economy, increasing costs and constraining job growth at a time when Americans are grappling with record inflation.

Our view: Rather than imposing new and unnecessary obligations on manufacturers, the federal government should focus on enforcing the strong regulations that are already in place and give manufacturers the space to find better solutions.

• “The EPA’s announcement . . . [about reconsidering] the PM 2.5 standard will only further weaken an already slowing economy,” said NAM President and CEO Jay Timmons. “Let manufacturers do what they do best: innovate and deploy modern technologies to protect the environment, while creating jobs and strengthening the economy.”

NAM in action: The NAM is rallying manufacturers to speak out against the EPA’s proposal and calling on Congress to oppose these harmful regulations.

• Manufacturers can show their support by sending an email to decision makers in Washington, explaining the real impact of this damaging proposal and urging them to stand up against unnecessary regulations.

Join in: There is an EPA hearing to discuss the proposal on Feb. 21. To participate, be sure to sign up soon—the registration deadline is Feb. 16.

Washington, D.C. – Following the release of the Environmental Protection Agency’s proposed new Waters of the United States rule, National Association of Manufacturers Senior Vice President of Policy and Government Relations Aric Newhouse issued the following statement:

“The EPA is unnecessarily rewriting critical permitting standards and tossing aside Supreme Court precedent in the process. This moving target frustrates efforts to expand domestic manufacturing and create well-paying jobs. Manufacturers cannot invest with confidence when the rules keep changing.

“Manufacturers need a sensible WOTUS proposal that provides permitting certainty and allows the industry to continue leading on environmental stewardship.”

In 2023, the Supreme Court is expected to issue a decision in Sackett v. EPA, a case that will determine the jurisdiction of the Clean Water Act and all regulations within its authority. Previously, the NAM submitted multiple sets of comments regarding the 2015 WOTUS rule to better inform policymakers. In addition, the NAM supported the 2017 executive order instructing the EPA to rescind the rule, and the NAM Legal Center had been in active litigation against the rule starting in 2015. The legal battle included a unanimous victory for the NAM at the U.S. Supreme Court on a key procedural issue, and in 2019, federal judges invalidated the rule.

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs more than 12.9 million men and women, contributes $2.77 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.