Environment

Washington, D.C. – Following the U.S. Supreme Court’s decision in Sackett vs. Environmental Protection Agency, National Association of Manufacturers Vice President of Energy and Resources Policy Brandon Farris released the following statement:

“The Supreme Court’s decision today will help put us on a path to regulatory certainty for manufacturers across the country as all the justices agreed that the EPA had overstepped its authority under the Clean Water Act. Manufacturers are committed to keeping our waters clean and demonstrating environmental stewardship, but Clean Water Act enforcement has been rife with ambiguities and inconsistencies, often allowing the EPA to overreach and attempt to regulate water—and even dry land—that is far beyond the scope of the law. This case demonstrates yet again why manufacturers and our economy need a sensible Waters of the United States proposal that provides clarity and certainty and allows the industry to continue leading the way on environmental protection. The EPA should heed the court’s ruling and revise its latest WOTUS proposal.”

Background:

Previously, the NAM submitted multiple sets of comments regarding the 2015 WOTUS rule to better inform policymakers. In addition, the NAM supported the 2017 executive order instructing the EPA to rescind the rule, and the NAM Legal Center had been in active litigation against the rule starting in 2015. The legal battle included a unanimous victory for the NAM at the U.S. Supreme Court on a key procedural issue, and in 2019, federal judges invalidated the rule.

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.90 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

A continuous regulatory onslaught is hamstringing the permitting process for U.S. energy and infrastructure projects—and thus reducing manufacturing competitiveness and harming the U.S. economy, NAM Vice President of Energy & Resources Policy Brandon Farris told Congress on Tuesday. 

What’s going on: By consolidating and cleaning up our infrastructure permitting regulations, the U.S. can advance multiple top policy priorities, Farris said at “The Next Fifty Years of the Clean Water Act: Examining the Law and Infrastructure Project Completion,” a hearing of the House Committee on Transportation & Infrastructure’s Subcommittee on Water Resources and Environment.

• “Streamlining and modernizing our nation’s permitting laws and procedures will help us advance many of our nation’s shared priorities, improving the quality of life for all communities; modernizing our infrastructure; achieving energy security; ramping up critical mineral production; enhancing manufacturing competitiveness and creating manufacturing jobs in the U.S.,” Farris said. “These are goals that all Americans can support.”

Why the wait? Current wait times for the approval of critical manufacturing facilities, roads, bridges and more are needlessly lengthy, and they’re forcing business overseas, Farris continued.

• “Why should we settle for a permitting process that can take 10 or 15 years to approve essential projects?” he asked, adding that in Australia, a country with similar environmental protections, approvals take about two to three years.
• One manufacturer of critical raw materials for semiconductors recently told the NAM that “because of the regulatory uncertainty in obtaining a Clean Water Act section 402 permit in a timely manner . . . they are going to build a facility in the E.U.” instead of the U.S.

Steps to success: Manufacturers are urging legislators to take several actions to rectify the broken system. These are:

• Consolidate permitting processes—with enforceable deadlines—for the siting of new energy projects and their infrastructure;
• Speed up the approval process for transportation-infrastructure projects;
• Commit to developing our resources to strengthen U.S. supply chains for the critical minerals vital to national security;
• Ensure that the Biden administration follows congressional intent on all streamlining efforts, including the One Federal Decision, a Transportation Department approach that seeks to expedite certain federal environmental reviews.

The last word: “Permitting reform will help us achieve more—more manufacturing, more domestic energy production, more inputs and raw materials and more jobs,” Farris concluded. “And our country and the world will be better off if we and our allies do not depend on our authoritarian rivals for energy and other natural resources.” 

Washington, D.C. – Following the release of the Environmental Protection Agency’s new rule on power plant emissions, National Association of Manufacturers Vice President of Energy and Resources Policy Brandon Farris released the following statement:

“Manufacturing in America is cleaner and more sustainable than ever, and the power generation sector has been making historic strides in bringing zero-emissions sources online. Even as that trend continues, this proposed regulation will prove unfeasible. With nearly 60% of our nation’s energy generated from natural gas and coal, this will either require deployment of still nascent technologies at an impractical pace or force those plants to shut down entirely. With the many threats to global energy security, that is a grave risk to our economy and to our families. The U.S. cannot afford to shut down more than half of our power generation and grind our economy to a halt. The NAM looks forward to working with the administration to ensure emissions standards protect public health while allowing manufacturers to continue pioneering technologies to make our air even cleaner and our climate even healthier.”

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.90 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

The NAM continues to push back against proposed revisions to the National Ambient Air Quality Standards for particulate matter.

What’s going on: On Tuesday NAM Director of Energy and Resources Policy Chris Morris urged the Environmental Protection Agency to withdraw its recent proposal to lower the primary annual particulate matter standard from 12.0 µg/m3 to between 8.0 and 10.0 µg/m3.

The big picture: “Manufacturers in the U.S. have become leaders in environmental stewardship and sustainability,” Morris pointed out.

• “Across the board, levels of major pollutants have declined dramatically, and the United States is outpacing our global competitors in air quality improvements,” he said.
• “According to the EPA, the U.S. has reduced six common NAAQS pollutants, including PM₅, by 78% between 1970 and 2020. Additionally, the EPA data show that PM_2.5 air quality has improved 43% between 2000 and 2020.”

The new regulations: The EPA’s new standards would impose a substantial economic burden on manufacturers, Morris continued.

• “First, there is the direct economic exposure manufacturers will face, which is a measure of the gross value added or employment in the manufacturing sector that could be affected or [placed] at risk,” he said.
• “Second is the indirect economic exposure of manufacturing as a result of a stricter PM₅ standard. This refers to the effects on the sector as the consequences are felt throughout the supply chain due to decreased overall investment.”

By the numbers: The EPA has estimated the total cost of the controls required for compliance with the proposed standard at up to $1.8 billion—and that figure could go higher, the agency admitted.

• This expensive policy will lead to job losses and fewer new manufacturing facilities, as well as fewer modernizations and expansions to existing facilities, Morris continued.

Unattainable standards: What’s more, some areas in the U.S. are “in non-attainment” with the current PM_2.5 standard, so a stricter standard will only put them further out of compliance, Morris told the EPA.

What should be done: To keep U.S. manufacturing competitive and to safeguard well-paying jobs, Morris said, the EPA should maintain the current annual particulate-matter standard of 12.0 µg/m3 and withdraw its proposal. 

The NAM in action: The NAM has been rallying manufacturers across the country to speak out against the EPA’s proposal and calling on Congress to oppose these harmful regulations.

• During the 2023 State of Manufacturing address last month, Timmons announced the launch of a nationwide campaign to maintain these standards in order to protect manufacturers.

London, U.K. – As the National Association of Manufacturers’ Competing to Win Tour begins its second week of bolstering strategic alliances across Europe, the association released findings from its Q1 2023 Manufacturers’ Outlook Survey. The survey found that expanding trading opportunities with Europe is a top priority for manufacturers, with more than 77% of respondents supporting negotiating new agreements with European nations.

“At a time when democracy and free enterprise are under attack from forces around the world, America can provide the leadership needed to defend our values, our institutions and our way of life,” said NAM President and CEO Jay Timmons. “By advancing an ambitious trade agreement agenda, we can ensure that the U.S.—and not competitors like China—writes the rules for the global economy and trading system. That has been the focus of our conversations with government, association and business leaders across Europe over the past week.”

The survey also continues to illustrate the need for Washington to enact policies that support the sector’s competitiveness as businesses face record job openings and increased production and input costs.

“With geopolitical turmoil and a banking crisis injecting further uncertainty into the economy, policymakers must act with urgency on key tax, trade, permitting and regulatory proposals if they want to help manufacturers in America fend off a recession,” said Timmons.

Background: Manufacturers have called on Congress and the White House to address key tax, trade, and permitting policies in recent months and have pressed lawmakers to work across the aisle to move legislation. The NAM conducted the survey from Feb. 21 to March 7, 2023.

Key Findings:

• Of companies that are engaged in international trade, nearly two-thirds of manufacturers said that Europe was either a somewhat or very important market for their company. With that in mind, 77.7% would support U.S. efforts to launch market-opening trade agreement negotiations with countries in Europe.
• Nearly three-quarters of respondents (74.9%) listed attracting and retaining a quality workforce as a primary business challenge, with increased raw material prices (60.1%) and supply chain challenges (55.8%) the next biggest impediments.
• More than 90% of respondents said that higher tax burdens on manufacturing income would make it difficult for their companies to expand their workforce, invest in new equipment or expand their facilities. Similarly, 93.9% suggest that increased regulatory burdens would weaken their ability to invest in their workers, equipment or facilities.
• More than 74% of respondents said that permitting reform—which would simplify and speed up the approval process for new projects—would be helpful to their manufacturing company, allowing them to hire more workers, expand their business or increase wages and benefits.
• More than 55% of respondents said that new proposed air standards from the Environmental Protection Agency would raise their costs of compliance, with roughly one-third suggesting that it would lead to increased permitting challenges and lessen investment and facility expansion plans.

Conducted by NAM Chief Economist Chad Moutray, the Manufacturers’ Outlook Survey has surveyed the association’s membership of 14,000 manufacturers of all sizes on a quarterly basis for the past 25 years to gain insight into their economic outlook, hiring and investment decisions and business concerns.

The NAM releases these results to the public each quarter. Further information on the survey is available here.

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.81 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

NAM President and CEO Jay Timmons has been making the most of his time on the road during the Competing to Win Tour, delivering a strong message to congressional leaders about top manufacturing priorities. He did so again yesterday on permitting reform with congressional leaders in Washington:

• “Some of the biggest obstacles preventing manufacturers—and therefore the entire American economy—from reaching our full potential are the permitting delays, red tape and complicated bureaucracy that have plagued us for decades,” he told the leadership of several House committees.

He went on to cite a number of different areas in which permitting reform is desperately needed, including . . .

Energy: Permitting reform is crucial to almost every sector of energy manufacturing, from oil and gas all the way to nuclear and clean energy technologies.

• “For example,” Timmons noted, “the siting of and infrastructure for hydrogen power generation and transportation and for advanced, small modular and micro-nuclear reactors have progressed far too slowly.”
• “Manufacturers depend on access to reliable and affordable energy to expand, which is why we support reforms that would foster transparent, streamlined and timely federal regulatory processes for the siting, permitting and licensing of energy delivery infrastructure of all types,” he continued.

Transportation: Manufacturers also need railroads, highways, airports and ports to run their operations and get their products out the door.

• “Yet obtaining permit approvals for these projects often takes years, especially when reviews are piecemeal and duplicative,” Timmons pointed out. “[M]any companies are waiting on the sidelines because transportation infrastructure construction moves too slowly—or not at all.”
• “To ensure the broad and beneficial impact of [the bipartisan Infrastructure Investment and Jobs Act of 2021] … it is critical to clear permit backlogs and ease processing timelines,” he said.

Resource development: Manufacturers prioritize sustainability, Timmons noted, but “restricting access to America’s abundant natural resources hinders our ability to strengthen domestic supply chains.”

• “The inconsistent administration of critical mineral policies, for example, has limited our ability to use a wide range of resources that lie on and beneath federal lands—resources that are critical to producing everything from cars to medical devices,” he added.
• “Streamlining resource permitting and leasing policies will help stabilize manufacturing supply chains, control costs for consumers, reduce our reliance on foreign countries and create jobs in the U.S.”

Environmental standards: Manufacturers have worked steadily to improve U.S. air quality, helping to “lead our country to the cleanest air in the modern world,” said Timmons.

• “Unfortunately, when federal agencies continually revise standards before current standards are met and before states have implemented prior mandates, they create unpredictability”—which may mean that new manufacturing facilities get built in other countries instead, where they don’t face as rigorous standards.
• However, if Congress makes regulations more predictable and consolidates review processes, the U.S. “can continue to build on its strong record of environmental stewardship by boosting domestic manufacturing, which is environmentally cleaner than international competitors,” Timmons concluded.

Congressional intent: Congress should make sure that permitting reform isn’t just passed, but also implemented as easily as possible, Timmons advocated.

• It should conform to “on recent and future statutory streamlining efforts such as One Federal Decision,” while making sure federal agencies don’t duplicate each other’s efforts and waste time.

The last word: “Permitting affects every aspect of our lives—from our economic security to our national security,” said Timmons. “[I]f we seize this opportunity to lead, there is no limit to what manufacturers in the United States can accomplish—for the good of our people and for the good of the world.”

Presented by Jay Timmons, President and CEO of the National Association of Manufacturers, the 2023 State of Manufacturing Address was given from Husco International in Waukesha, Wisconsin. Special remarks were given by Kurt Bauer, President and CEO, Wisconsin Manufacturers & Commerce. Special thanks to Husco President and CEO Austin Ramirez and his team for hosting this year’s address.

Read the official remarks here.

We’re hitting the road. This year’s NAM State of Manufacturing Address officially kicked off the 2023 leg of the NAM’s Competing to Win Tour. The tour will continue to spotlight the industry’s rapid transformation, while also focusing on manufacturing’s well-paying careers, diverse workforce and real-world solutions for the industry’s continued growth.

Upcoming stops: Waukesha and Pewaukee, Wisconsin (Tue, Feb 21); Fishers, Indiana (Wed, Feb 22); Harahan and Avery Island, Louisiana (Thurs, Feb 23)

VISIT THE COMPETING TO WIN AGENDA

Manufacturers have long led the way in efforts to reduce air pollution and improve air quality. Yet, new proposed regulations from the federal government will work against these efforts instead of bolstering them, stymying critical progress and destabilizing economic growth at a time when both are more important than ever.

The challenge: The Environmental Protection Agency is considering a new rule that would impose stricter air standards on particulate matter known as PM2.5 (i.e., particles that measure two and a half micrometers or less in diameter). This rule would enact significant top-down restrictions, forcing manufacturers to change their operations abruptly and without any support.

The reality: For years, manufacturers across all sectors have been developing smart, innovative ways to use energy, water and other resources more sustainably—all while boosting economic growth and creating good jobs at the same time.

• Today, manufacturing in the U.S. is cleaner and greener than at any other time in history, largely due to a revolution in how manufacturers produce, use and recycle energy and resources.
• Across the board, levels of major pollutants have declined dramatically over the past few decades. Thanks to existing regulations and a culture of innovation, the U.S. is far outpacing global competitors in environmental stewardship.

By the numbers: According to the EPA, the U.S. reduced six common pollutants covered by National Ambient Air Quality Standards, including PM2.5, by 78% between 1970 and 2020. In fact, PM2.5 levels alone have dropped a full 44% since 2000.

The impact: These new regulations could be devastating for manufacturers and for the climate. Here are just a few of the negative repercussions:

• An additional regulatory burden on businesses will drain resources from innovative manufacturers, posing additional hurdles to the investment in research and development that fuels progress in energy efficiency and climate action.
• Making permitting harder could also jeopardize new clean energy projects that America needs to address climate change.
• The standards will hinder onshoring, resulting in continued manufacturing abroad—which is less clean than manufacturing in the U.S. The EPA’s proposal undercuts U.S. competitiveness and will not further the goal of global emissions reduction.
• New regulations could damage an already-slowing economy, increasing costs and constraining job growth at a time when Americans are grappling with record inflation.

Our view: Rather than imposing new and unnecessary obligations on manufacturers, the federal government should focus on enforcing the strong regulations that are already in place and give manufacturers the space to find better solutions.

• “The EPA’s announcement . . . [about reconsidering] the PM 2.5 standard will only further weaken an already slowing economy,” said NAM President and CEO Jay Timmons. “Let manufacturers do what they do best: innovate and deploy modern technologies to protect the environment, while creating jobs and strengthening the economy.”

NAM in action: The NAM is rallying manufacturers to speak out against the EPA’s proposal and calling on Congress to oppose these harmful regulations.

• Manufacturers can show their support by sending an email to decision makers in Washington, explaining the real impact of this damaging proposal and urging them to stand up against unnecessary regulations.

Join in: There is an EPA hearing to discuss the proposal on Feb. 21. To participate, be sure to sign up soon—the registration deadline is Feb. 16.

Washington, D.C. – Following the Environmental Protection Agency’s announcement that it will reconsider National Ambient Air Quality Standards for particulate matter, National Association of Manufacturers President and CEO Jay Timmons released the following statement:

“Improving air quality in the U.S. is a priority for manufacturers, and we’ve worked for years to make progress in delivering some of the cleanest manufacturing processes in the world. Based on the EPA’s own data, air quality has improved by more than 30% over the past 20 years, even as production and energy consumption have increased.

“The EPA’s announcement today to reconsider the PM 2.5 standard will only further weaken an already slowing economy. It will push states and localities into a nonattainment designation, which will halt new investment, stop operations in some circumstances and cost jobs. Manufacturers are already concerned about the threat of a recession—62% believe that the U.S. will officially slip into a recession in 2023, according to the Q4 2022 NAM Manufacturers’ Outlook Survey released yesterday.

“Today’s announcement is the wrong approach. Let manufacturers do what they do best: innovate and deploy modern technologies to protect the environment, while creating jobs and strengthening the economy.”

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs more than 12.9 million men and women, contributes $2.77 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

Manufacturers are pursuing sustainability like never before.

That’s according to recent polling conducted by the Manufacturing Leadership Council, the NAM’s digital transformation division. The annual Sustainability and the Circular Economy research survey seeks to determine the progress made in sustainable manufacturing.

Competitiveness: There has been a surge in the number of manufacturing executives who view sustainability as critical to the future of their businesses.

• 58% of respondents in 2022 believe sustainability is essential to future competitiveness compared to 38% in 2021.
• 68% of executives say they are implementing extensive, corporate-wide sustainability strategies. That’s up from just 39% in 2019.

What’s driving change: The motivations go beyond regulatory compliance and cost savings.

• 78% say sustainability is about better alignment with corporate values.
• 68% believe in creating a cleaner, healthier environment.
• 66% seek to improve company reputation with customers and investors.

Top corporate goals: More than half of survey respondents reported having specific sustainability goals and metrics across almost all key functions in the company.

• Goals were most apparent in manufacturing and production (79%), supply chain (69%) and product design and development (67%).
• Additional goals were cited in transportation and logistics (56%) and partner compliance (51%).

Energy efficiency is No. 1: The primary sustainability focus of manufacturers, according to survey results, is energy efficiency and reduction, combined with the transition to renewable energy sources. These efforts are linked intrinsically to meeting net-zero emissions goals.

• 45% of respondents report having announced formal net-zero goals.
• 30% aim to hit net zero by 2030.

Digital tech, employee training play a role: Also on the rise is the number of companies that recognize the importance of digital solutions in their sustainability efforts.

• These tools are being used to manage and monitor materials and energy consumption, optimize operations to improve efficiency and report sustainability progress.
• Respondents also say meeting sustainability targets must include engaging employees through education and training, as well as greening their supply chain.

The last word: An overwhelming 90% of all respondents agree that manufacturing has a special responsibility to society to become more sustainable and accelerate the transition to a future circular industrial economy.

Interested in putting some renewable energy solutions into action, including solar power, battery storage and LED lighting? Programs from utility companies and other entities enable efficiency upgrades with little or no upfront capital. Connect with NAM Energy to explore your options!