Environment

Press Releases

Timmons: Sustainable Keystone XL Project Is Model for Future Infrastructure

Walking Away Could Cost 10,000 Jobs

Washington, D.C. – Following President Joe Biden’s executive order to rescind the permit for the Keystone XL project, National Association of Manufacturers President and CEO Jay Timmons released the following statement:

“Manufacturers are disappointed with the administration’s decision to block this sustainable project, which can serve as a model for infrastructure of the future, and if not reconsidered, represents a missed opportunity for manufacturing workers in America. The Keystone XL project would employ 10,000 union workers for pipeline construction, spur additional renewable energy projects, operate with net-zero emissions and improve our energy security.

“This critical union project has evolved over the past five years, so we look forward to highlighting the importance of this modern project for manufacturers. Rebuilding our economy will require us to invest in infrastructure of all types, including Keystone XL. Manufacturers have a strong commitment to responsible environmental stewardship, and protecting our environment does not require us to walk away from this job-creating opportunity.”

Recently, the NAM and several labor unions wrote to President Biden on the impact of rescinding the permit for the Keystone XL project and the ways the project has evolved in recent years.

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs more than 12.3 million men and women, contributes $2.32 trillion to the U.S. economy annually and has the largest economic multiplier of any major sector and accounts for 63% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org

Policy and Legal

NAM Reinforces Climate Priorities

Get the Latest News

Sign up here

As a new administration and Congress begin their terms in Washington, the NAM is reminding policymakers that manufacturers work hard to safeguard our environment. A longtime advocate of climate policies that promote manufacturing jobs in America, the NAM has now compiled its recommendations in a paper called “The Promise Ahead.”

The big idea: Climate change is a global problem that requires a global solution, which is why it’s critical for the United States to work in tandem with other countries. And while all nations need to be involved in promoting climate action, there should also be room for the kind of science-led innovation that American manufacturers have already demonstrated and will continue to provide.

  • As it says in the paper, “Manufacturing holds the key to solving this global challenge. Think about the technologies that will get us there. Clean energy. Carbon capture. Batteries. Microgrids. Efficiency. Advanced vehicles. Manufacturers make these products and technologies and will continue to invent new ones.”

A push for global action: The plan recommends negotiating and ratifying a binding international climate action treaty that is both fair and enforceable, a position the NAM has long held. This will ensure that the United States does not suffer a competitive disadvantage and can lead the way in developing job-creating technologies and products.

A roadmap for results: The plan also offers guidelines for a national approach to climate change, adhering to three core principles that have always guided the NAM’s climate strategy:

  • One unified policy: Instead of the patchwork of federal, state and local climate change regulations that manufacturers currently face, the industry needs a clear federal policy that offers predictability, consistency and certainty while meeting science-based targets. Businesses should be able to plan for the future—and shouldn’t have to worry that the policies of today will be different tomorrow.
  • A level playing field: Any national policy to address emissions should be economy-wide and apply to all emitters. Congress should develop plans that don’t unduly burden one sector over another, and manufacturers shouldn’t be expected to shoulder the already-high cost of new regulations alone.
  • Consumer choice and competitiveness: This policy approach shouldn’t automatically involve a mandated phaseout of any manufactured product. Instead, policymakers should lead with the tools and strategies manufacturers need to improve products, preserving consumer choice and supporting the innovation that manufacturing provides.

Immediate actions: The blueprint also offers some bipartisan actions that could be taken now and reduce emissions immediately. These proposals include the following:

  • Investing in energy and water efficiency
  • Funding and expanding climate and clean energy R&D programs
  • Paving the way for a smart grid
  • Commercializing and deploying carbon capture, utilization and storage technology
  • Ratifying the Kigali Amendment, which sets a global path for phasing down HFCs

The last word: “It’s remarkable to see the commitments manufacturers are making to the health of our communities, our country and our world—which is why we have consistently led the drive for climate innovation,” said NAM Vice President of Energy and Resources Policy Rachel Jones. “We need a national and international approach that unleashes our efforts. Our plan is designed to create a rallying point for that approach and spur sustainable economic and environmental progress.”

Press Releases

Manufacturers Outline Executive Action Policy Priorities for Incoming Administration

Washington, D.C. – The National Association of Manufacturers called on President-elect Joe Biden to help ensure the future strength of manufacturing in America by extending key executive orders into the new administration and rescinding those that have harmed manufacturing.

“For decades, we have worked with policymakers from across the ideological spectrum to craft policies that encourage the growth of manufacturing in the United States,” said NAM President and CEO Jay Timmons in a letter to the incoming administration. “Now more than ever, America needs leaders in Washington who are focused on increasing American jobs, wages and investment.”

The letter outlines executive orders that have had a significant impact, positive or negative, on manufacturers over the past four years, and it urges the president-elect “to reverse the most harmful of these orders and keep or expand those that create an environment that is conducive to growing America’s manufacturing sector.”

The NAM’s recommendations will help manufacturers continue to respond to the devastating pandemic and will also power the United States’ economic recovery by setting the stage for manufacturing growth.

To read the full letter, click here.

Background:

The NAM has requested President-elect Biden repeal the following executive orders and consider executive orders for extension.

Executive Orders

Rescind:

  • “Rescission of the Deferred Action for Childhood Arrivals Program”
  • E.O. 13950 – “Combating Race and Sex Stereotyping”
  • E.O. 13672 – “Revocation of Federal Contracting”
  • E.O. 13769 – “Protecting the Nation from Foreign Terrorist Entry into the United States”
  • “President’s Report to Congress on the Proposed Refugee Admissions for FY 21”
  • Presidential Proclamation 10052 – “Suspending Entry of Aliens Who Present a Risk to the U.S. Labor Market Following the Coronavirus Outbreak”
  • E.O. 13944 – “Ensuring Essential Medicines, Medical Countermeasures and Critical Inputs Are Made in the United States”
  • E.O. 13948 – “Lowering Drug Prices by Putting America First”
  • E.O. 13957 – “Creating Schedule F in the Excepted Service”

Extend:

  • E.O. 13771 – “Reducing Regulation and Controlling Regulatory Costs”
  • E.O. 13805 – “Establishing a Presidential Advisory Council on Infrastructure”
  • E.O. 13766 – “Expediting Environmental Reviews and Approvals for High-Priority Infrastructure Projects”
  • E.O. 13845 – “Continuing the President’s National Council for the American Worker and the American Workforce Policy Advisory Board”
  • E.O. 13932 – “Modernizing and Reforming the Assessment and Hiring of Federal Job Candidates”
  • E.O. 13777 – “Enforcing the Regulatory Reform Agenda”
  • E.O. 13806 – “Assessing and Strengthening the Manufacturing and Defense Industrial Base and Supply Chain Resiliency of the United States”
  • E.O.s – “Strengthening the Federal Government’s Anti-Counterfeiting Efforts”

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs more than 12.3 million men and women, contributes $2.32 trillion to the U.S. economy annually and has the largest economic multiplier of any major sector and accounts for 62% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

Policy and Legal

NAM Celebrates Climate Win on Reducing Pollutants

Get the Latest News

Sign up here

It was hard to focus on any one policy in Congress’s enormous, year-end funding effort, but one deserves more press than it got at the time. That’s the bipartisan legislation that will reduce harmful refrigerants—a major climate victory, and one that the NAM was instrumental in achieving, according to E&E News (subscription).

Good for climate: The legislation, which was co-sponsored by Republican Sen. John Kennedy (LA) and Democratic Sen. Tom Carper (DE), will help the U.S. avoid more greenhouse gas emissions every year than Germany produces in total, bringing the United States into alignment with a global deal called the Kigali Amendment. The Kigali Amendment seeks to phase down superheating pollutants like hydrofluorocarbons to prevent Earth’s temperatures from increasing by a half-degree Celsius by the end of the century.

Good for business: The deal to phase down HFCs will also benefit manufacturers in the United States who are producing greener alternatives to HFCs.

NAM’s efforts: When the legislation ran into roadblocks in the Senate, the NAM worked alongside members and the business community to educate lawmakers and move the process forward.

  • “It took a lot of late-night phone calls,” NAM Vice President of Energy and Resources Policy Rachel Jones told E&E News. “I don’t think there’s any one person or organization that can or should claim credit. This really only worked because people were willing to build the bridge from both sides of the river.”

The results: The legislation, which was ultimately included in the year-end omnibus bill that Congress passed in December, will cut HFCs by 85% over 15 years, while providing exemptions for specialty applications without viable alternatives.

The word from the NAM: “You don’t accomplish big things alone,” Jones tells us. “House and Senate staffers did yeoman’s work behind the scenes to hammer out a deal. Sister trade associations like AHRI and the Alliance for Responsible Atmospheric Policy were smart to partner with the Natural Resources Defense Council from the start.”

“Key member companies, including Honeywell, Chemours, Rheem and Trane (whose CEO is the NAM’s chairman), worked tirelessly with both sides of the aisle to build support. They emphasized to policymakers that the phasedown in HFCs would lower the global temperature while also ensuring manufacturers in America maintain their global leadership.”

Press Releases

Modern Manufacturing Ready for Aviation Emissions Standards

Jones: "We support these CO2 standards because aligning with international rules will further strengthen the American aerospace manufacturing sector"

Washington, D.C. – Following the Environmental Protection Agency’s decision on emissions standards for airplanes, which aligns U.S. standards with those set by the International Civil Aviation Organization, National Association of Manufacturers Vice President of Energy and Resources Policy Rachel Jones released the following statement:

“America’s aerospace manufacturers have been pioneers in developing the technologies that have cut in half airline travel’s carbon footprint over the past 30 years. We support these new CO2 standards because aligning with international rules will further strengthen the American aerospace manufacturing sector and drive innovation, support American jobs and put us in a position to continue leading on the global stage. As we help lead our country’s response to COVID-19, manufacturers remain committed to advancing responsible environmental stewardship.”

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs more than 12.2 million men and women, contributes $2.35 trillion to the U.S. economy annually and has the largest economic multiplier of any major sector and accounts for 62% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

Press Releases

Manufacturers Encouraged by EPA’s Proposal to Keep Obama Ozone Standard

Jones: “This decision, based on sound science, advances important goals while supporting sustainable domestic growth.”

Washington, D.C. – Today, the EPA announced its final decision to retain the clean air standards for ozone. NAM Vice President of Energy and Resources Policy Rachel Jones released the following statement:

“Manufacturers’ commitment to clean air is why we support the EPA’s decision to keep the ozone standards established under the Obama administration. This decision comes after careful review and consideration of the most current available scientific evidence and risk and exposure information, as well as consultation with the agency’s independent science advisors.

“This decision, based on sound science, advances important goals while supporting sustainable domestic growth. We have long supported smart policies that protect the environment and improve public health, and the policy announced today is the right approach.”

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs more than 12.2 million men and women, contributes $2.35 trillion to the U.S. economy annually and has the largest economic multiplier of any major sector and accounts for 62% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org

Press Releases

Manufacturers Secure Priorities in Year-End Stimulus Legislation

Stoick: “We have been fully engaged with House and Senate leaders to keep this vital work going"

Washington, D.C. – Following passage of Senate amendment to H.R. 133 – United States Mexico Economic Partnership Act [Consolidated Appropriations Act, 2021], National Association of Manufacturers Vice President of Government Relations Jordan Stoick released the following statement:

“Manufacturers secured many of our top priorities in this important legislation, including numerous provisions the NAM first proposed in our ‘American Renewal Action Plan.’ The additional funds for the Paycheck Protection Program will provide a continued lifeline for small manufacturers. Furthermore, the resources for testing and vaccine distribution, as well as tax incentives for manufacturers that keep employees on payroll and invest in safety measures, will ensure America’s dedicated, essential manufacturing workers can continue their mission safely.

“Across the country, manufacturers are providing the vaccines, PPE and supplies needed to defeat COVID-19, so we have been fully engaged with House and Senate leaders to keep this vital work going. We have a difficult winter ahead, and this legislation will help save lives and livelihoods and keep manufacturers operating. As folks continue to roll up their sleeves and receive initial doses of the vaccine, we are also looking to the other priorities facing us in the new year—including historic investments in infrastructure, energy innovation and more—to ensure manufacturers can lead a full economic recovery and American renewal.”

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs more than 12.2 million men and women, contributes $2.35 trillion to the U.S. economy annually and has the largest economic multiplier of any major sector and accounts for 62% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

Business Operations

A Manufacturer Works to Keep Forests Safe

Get the Latest News

Sign up here

International Paper is acutely aware that forests are “the lungs of the landscape,” says Chief Sustainability Officer Sophie Beckham. That’s why the company, which serves 25,000 customers in 150 countries around the world, has developed a close partnership with The Nature Conservancy.

Beckham chatted with us recently about what the two organizations have done together. Here’s the condensed interview.

How it started: International Paper’s collaboration with TNC goes back decades, to the days when International Paper was the largest private forest landowner in the United States. About 15 years ago, when International Paper made the decision to divest of all of its land holdings, TNC acquired significant amounts of the company’s land. And in 2017, International Paper decided to go further—taking on an expansive effort to help others support forests and communities.

  • “We wanted to look outside our own supply chains, and understand how might we contribute to knowledge on natural climate solutions and biodiversity,” said Beckham. “Working on projects that are more global in scope and more focused on natural climate solutions—that was the beginning of the relationship.”

Phase 1: First, International Paper partnered with TNC to reduce the carbon impact of logging in southeast Asia, including through cutting-edge methods like bioacoustics—a technique for measuring the biodiversity of forests by recording the animals and insects that live there. The company also employed reduced-impact logging methods to advance carbon sequestration.

Phase 2: Earlier this year, the partnership moved into a new phase, and today International Paper is bringing its expertise to North American forests. It partners with private local landowners to sequester more carbon, which reduces the impact of climate change while protecting the land’s commercial value.

  • “We’ve learned from our experiences around the world that we have great opportunities to promote sustainability without compromising the economic value of the land for landowners—and now, we’re bringing those techniques to forests in North America,” says Beckham.

Good advice: For other companies interested in promoting sustainability, Beckham emphasizes the importance of strategic partnerships and collaboration.

“There was a time in which manufacturers felt a little bit in the defensive position with environmental stakeholders—but the turning point has already happened,” said Beckham.

Press Releases

Manufacturers Congratulate EPA Nominee Michael Regan

Washington, D.C. – Following President-elect Joe Biden’s nomination of North Carolina Department of Environmental Quality Secretary Michael Regan to be administrator of the U.S. Environmental Protection Agency, National Association of Manufacturers President and CEO Jay Timmons released the following statement:

“Manufacturers take seriously our responsibility to drive economic growth while being good stewards of the environment. Over the past decade, manufacturers in America reduced the carbon footprint of our products by 21%, while contributing 18% more value to the American economy. Across the board, we have outpaced our competitors around the world in reducing emissions, while pushing the EPA to improve and streamline its rulemaking processes. Manufacturers have led the way in innovations that improve energy efficiency and save and recycle water, we have implemented successful initiatives to reduce pollution and waste. We know that through smart policy and regulations based in science, we can continue to achieve our goals.

“So we look forward to working with Michael Regan when he becomes EPA administrator and regularly providing our perspectives on critical issues facing our industry, our workers and our environment. Given his previous service at the EPA under Presidents Clinton and Bush, he knows the agency well, and we congratulate him on his nomination. As we’ve often said, when given regulatory clarity and the tools to be competitive, manufacturers will keep our promises to protect our earth, the only home we have.”

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs more than 12.2 million men and women, contributes $2.35 trillion to the U.S. economy annually and has the largest economic multiplier of any major sector and accounts for 62% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

Press Releases

Manufacturers Congratulate Interior Nominee Rep. Debra Haaland

Washington, D.C. – Following President-elect Joe Biden’s nomination of Rep. Debra Haaland (D-NM) to be secretary of the Department of the Interior, National Association of Manufacturers President and CEO Jay Timmons released the following statement:

“We congratulate Rep. Haaland on her history-making nomination to serve as U.S. Secretary of the Interior. Manufacturers are committed to the responsible stewardship of America’s lands, waters and resources, and we look forward to working with Secretary-designate Haaland. America is blessed with abundant and diverse natural resources, and when we responsibly harness their potential, we create opportunities to build stronger communities, a vibrant economy and a brighter future—all while advancing conservation and sustainability.”

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs more than 12.2 million men and women, contributes $2.35 trillion to the U.S. economy annually and has the largest economic multiplier of any major sector and accounts for 62% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

View More