Transportation and Infrastructure

Press Releases

Manufacturers to White House: Revising Air Regulation Makes Nearly Half the Nation Ineligible for New Manufacturing Investment

Washington, D.C. The National Association of Manufacturers, along with 71 leading business groups representing sectors across the economy, urged White House Chief of Staff Jeff Zients to help ensure that the Environmental Protection Agency maintains existing National Ambient Air Quality Standards for fine particulate matter (PM2.5).

“Manufacturers in America are committed to improving air quality and have been responsible for the development of new processes and technologies that have made our sector more sustainable,” said NAM President and CEO Jay Timmons. “The Biden administration’s proposal to make these standards even more stringent is putting manufacturing investment at risk across vast swaths of the country and will jeopardize nearly 1 million jobs. If the president and his agencies want the Bipartisan Infrastructure Law and the CHIPS and Science Act to succeed—and want to see manufacturing in America continue to grow—they should refrain from further changes to the standard, which is already among the most aggressive in the world.”

As the letter states:

A proposed discretionary revision to this standard, which is under review by the Office of Information and Regulatory Affairs, could put nearly 40% of the U.S. population in areas of nonattainment. Doing so would risk jobs and livelihoods by making it even more difficult to obtain permits for new factories, facilities and infrastructure to power economic growth. This proposal would also threaten successful implementation of the Infrastructure Investment and Jobs Act, the CHIPS and Science Act and the important clean energy provisions of the Inflation Reduction Act.

Our members have innovated and worked with regulators to lower PM2.5 concentrations significantly, and further progress is being made as part of the energy transition investments. The EPA recently reported that PM2.5 concentrations have declined by 42% since 2000, driven by major emissions reductions from both mobile sources and the power sector. As a result, America’s air is cleaner than ever.

A recent analysis conducted by Oxford Economics and commissioned by the National Association of Manufacturers found that the proposed standard would reduce GDP by nearly $200 billion and cost as many as 1 million jobs through 2031.

At 8 ug/m3, the lowest level considered by the EPA, more than 20% of all U.S. counties would be out of attainment and thrown into permitting gridlock.

To view the full letter, click here.

-NAM-

The National Association of Manufacturers is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs 13 million men and women, contributes $2.91 trillion to the U.S. economy annually and accounts for 53% of private-sector research and development. The NAM is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the NAM or to follow us on Twitter and Facebook, please visit www.nam.org.

Input Stories

FCC Seeks to Reinstate Net Neutrality Rules

The Federal Communications Commission voted late last week to advance a proposal that would reinstate Obama-era net neutrality rules, according to The New York Times (subscription).

What’s going on: “The commissioners at the Democratic-led agency voted 3 to 2 along party lines to kick off a monthslong process to bring back so-called net neutrality regulations.”

  • In an NAM-supported move in 2018, the previous administration repealed net neutrality regulations put into place by President Obama in 2015, saying they stymied innovation.

Why it’s important: Last week’s proposal—which telecommunications companies have pledged to fight—“will ultimately enable the agency to categorize high-speed internet as a utility, like water or electricity. … The agency will then be able to police broadband providers for net neutrality violations.”

  • That’s precisely why the proposal to restore the rules is problematic, critics say. A trade group representing telecom firms “wrote letters this week to the House and Senate Intelligence Committees warning of ‘mission creep’ by the F.C.C.”
  • In 2017, then-FCC Chairman Ajit Pai said net neutrality laws amounted to “special interests [who] weren’t trying to solve a real problem but [were] instead looking for an excuse to achieve their longstanding goal of forcing the Internet under the federal government’s control.”

Government overreach: Indeed, the 2015 net neutrality rules—very similar to the ones now being advanced—were a prime example of agency overreach, said NAM Chief Legal Officer Linda Kelly in 2018.

  • The 2015 FCC’s “heavy-handed approach … was neither appropriate nor necessary for the rapidly evolving, highly competitive broadband market,” Kelly said.
  • Net neutrality laws also decrease investment in broadband, the NAM has told policymakers.

Up next: The FCC will take public comments on the proposed rules. The commission could vote to adopt new regulations as soon as early next year.

The last word: “Manufacturers are disappointed the FCC is moving forward with its proposal to regulate 21st-century broadband with rules designed for the era of the rotary phone,” said NAM Vice President of Domestic Policy Charles Crain. “Reinstating this misguided, overreaching policy of the past is a recipe for stymied innovation and outdated infrastructure.”

Input Stories

Hydrogen Growth Demands Permitting Reform

Hydrogen demand is likely to skyrocket in the next few decades—if permitting delays and other setbacks don’t stymie it, according to WSJ Pro (subscription).

What’s going on: “A new report from consulting firm McKinsey forecasts a fivefold rise in hydrogen demand to 600 million metric tons a year by 2050, if climate change is limited to 1.5 degree Celsius. On current trajectories, however, that supply could be between 175 million to 291 million metric tons a year if steps aren’t taken to speed up permitting and lower both equipment and investment costs, the report warned.”

  • The report identified three major challenges to meeting the rising demand: increased costs, a slow permitting process and “lack of access to capital,” which can be attributed largely to higher interest rates.

Incentives abound: Government incentives for hydrogen are on the rise. Up to $300 billion has been made available worldwide for hydrogen-energy projects this year, a sixfold increase from 2021.

  • Last week, the Energy Department announced $7 billion in subsidies to create seven clean-hydrogen “hubs” in the U.S.

More support required: More action from government is still needed—particularly when it comes to allowing hydrogen projects to proceed.

  • “Faster permitting times are needed to bring more hydrogen projects online, as well as the renewable energy to power their electrolyzers, industry experts say. A recent report from the International Energy Agency said current project lead times are too long and can act as a barrier to clean hydrogen uptake.”

What we’re doing: Manufacturers have long been urging policymakers to fix the broken U.S. permitting system.

  • The NAM recently laid out a multistep plan for Congress “to modernize and update our nation’s antiquated permitting system.”
Input Stories

IEA: World Needs More Transmission Lines


The world must add or replace nearly 50 million miles of transmission lines in the next 17 years to allow countries to meet climate goals and achieve energy security, according to a new report by the International Energy Agency covered by CNBC.

What’s going on: The amount of transmission line needed—49.7 million miles—“is roughly equivalent to the total number of miles of electric grid that currently exists in the world, according to the IEA.”

  • The undertaking “will require the annual investment in electric grids of more than $600 billion per year by 2030,” double current global investment levels in transmission lines.
  • Countries must also make changes to the way they operate and regulate their grids.

Why it’s important: Investment in global transmission lines has not kept pace with the growing appetite for renewables, and without replacements and additions to transmission lines, power bottlenecks will become “ever larger.”

Growing gridlock—and demand: “There are currently 1,500 gigawatts of renewable clean energy projects in what the IEA calls ‘advanced stages of development’ that are waiting to get connected to the electric grid around the world.”

  • Meanwhile, demand for electricity will only rise as more of the globe moves to electric power.
  • But building new transmission lines takes time, owing to lengthy permitting processes—which is why the NAM has long advocated speeding the process in the U.S.

Our view: “The NAM has identified building additional transmission lines as a top priority for the next round of permit reform negotiations,” said NAM Vice President of Domestic Policy Brandon Farris.

  • “We will continue to fight to break down barriers to building new projects, including manufacturing facilities, energy generation, transmission lines, bridges, roads and more.”
Input Stories

A Supply Chain Leader Supports Other Women in Manufacturing


When Carrie Shapiro began her career as an engineering student at the Georgia Institute of Technology, she didn’t expect to work in manufacturing—but the moment she walked into a manufacturing facility near her school for an interview, she was hooked.

“I’ve had so many opportunities in manufacturing that I never wanted to leave,” said Shapiro. “From the very beginning, I was able to keep learning and growing and making better relationships.”

Today, Shapiro serves as the vice president of sourcing execution at Georgia-Pacific—a pulp and paper company—where she guides procurement and uses her expertise in supply chain operations to benefit the company’s 110 facilities. As a leader in the industry, she’s also focused on helping potential creators understand all that manufacturing has to offer.

A changing world: Shapiro’s role has been especially important over the past few years, as the COVID-19 pandemic and its aftermath forced companies to adjust their supply chains and react to shortages in real time. For Shapiro, that process required rethinking risks, using data effectively and focusing on achieving stability before optimization.

  • “The mistake that we often make is we try to optimize something that’s not stable,” said Shapiro. “If you’ve got chaos in your supply chain, you have no business trying to optimize it. You have to stabilize first.”

A need for humans: As Shapiro notes, data has become more readily available than ever before, and new tools are helping organizations make smart adjustments in real time. Yet, human decision-making and critical thinking still have a vital role at the center of manufacturing.

  • “Tools are great, software is great, tech is great—but it should be an enabler and not a magic wand,” said Shapiro. “You still have to know your process, understand your current state and know your capabilities across the supply chain to make effective decisions. Tools don’t absolve you from doing the real work of continuous improvement.”

Read the full story here.

Input Stories

Ship with Legs Will Be World’s Biggest Wind Farm


A planned offshore wind farm whose developers are billing it as the largest in the world has produced electricity for the first time, according to CNBC.  

What’s going on: “Located in the North Sea, over 130 kilometers off England’s northeast coast, the Dogger Bank Wind Farm still has some way to go before it’s fully operational, but the installation and powering up of its first turbine is a major feat in itself. That’s because GE Vernova’s Haliade-X turbines stand 260 meters tall—that’s higher than San Francisco’s Golden Gate Bridge—and have blades measuring 107 meters.”

  • Once the installation is complete, the ship will have 277 Haliade-X turbines.

Why it’s a game-changer: “Described by Dogger Bank as the ‘largest offshore jack-up installation vessel ever built,’ in many ways, it’s the pinnacle of an extensive supply chain involving numerous businesses and stakeholders.”

  • Thanks to four legs that allow the vessel to lift itself above the water’s surface, the wind farm will be able to operate in depths of up to 80 meters—some 30 meters deeper than fixed-foundation wind farms.

Power producer: Once fully up and running, project developers say the Dogger Bank Wind Farm will have a capacity of 3.6 gigawatts, enough “to power as many as 6 million homes per year.”

  • For the sake of comparison, the U.K.’s fully operational Hornsea 2—considered a major wind farm—has a capacity of just over 1.3 GW, according to another CNBC piece.

A complex project: The totality of the undertaking is “huge,” according to one source, and being made more complex “by the use of next-generation turbines and a next-generation installation vessel.”

  • Given the immense size of the Haliade-X turbines, “we use a number of specially designed pieces of equipment to transport” them, a GE Offshore Wind spokesperson said.

The NAM’s view:  “Offshore wind can be an important part of an all-of-the-above energy strategy that helps meet energy security and decarbonization goals,” said NAM Vice President of Domestic Policy Brandon Farris. “Manufacturers keep leading the way with investments in the next generation of energy technologies—and the NAM will continue to advocate energy policies that provide manufacturers affordable, reliable energy.”  ​​​​​​​

Input Stories

Key U.S.–Mexico Trade Route Reopens


The Bridge of the Americas in South-Central El Paso, Texas—one of the largest land ports for U.S.–Mexico trade—restarted commercial operations on a limited schedule yesterday, according to a notice from U.S. Customs and Border Protection.

  • It’s a development that the NAM advocated, having engaged in continued talks with the Biden administration and relevant agencies since cargo movement was suspended last month.  

What’s going on: The port of entry reopened at 6:00 a.m. Tuesday and closed at 2:00 p.m., a schedule it will keep temporarily each week Monday through Friday.

  • In recent weeks, large numbers of migrants have crossed the Texas–Mexico border, and the CBP stopped commercial movement along the Bridge of the Americas so federal customs agents could assist with the influx.

Why it’s important: “The temporary bridge closure and the Texas Department of Public Safety’s (DPS) enhanced safety truck inspections at El Paso’s two other truck ports of entry have drastically slowed cargo truck crossings in recent weeks between El Paso and Juárez, Mexico,” according to the El Paso Times on MSN.

  • Last week, the value of goods in thousands of trucks backed up on the Mexican side of the border “had surpassed $1.5 billion,” according to a source cited by Reuters (subscription).
  • Prior to the temporary closure, the bridge had been processing approximately 500 northbound trucks a day, according to the El Paso Times.

The NAM says: “Mexico is the largest trading partner of the U.S. and facilitating trade between the two countries is vital to manufacturers’ operations,” said NAM Director of Trade Facilitation Policy Ali Aafedt. “The NAM will continue to share the impacts of the disruption with the federal government and urge solutions to resolve the continuing backlog.” 
 

Business Operations

How Manufacturers Can Strengthen Supply Chains’ Resilience

Since the onset of COVID-19 in 2020, supply chains have faced extraordinary challenges around the world. In the midst of shortages and disruptions, as well as global conflicts, how can manufacturers ensure that they receive the materials they need and deliver their products on time?

At a recent NAM event, attended by more than 75 executives from both manufacturing companies and association partners, Supply Chain Insights Founder Lora Cecere addressed the question of how the industry can build resiliency into the supply chain of the future. Here’s some useful advice from her keynote speech, called “Supply Chain Workshop: Connecting and Securing the Supply Chain for 2030.”

Defining resilience: As Cecere noted, in many cases manufacturers may have different ideas about what resilience represents—and it’s important to settle on a clear definition.

  • “I define resilience as the ability to have the same cost quality and customer service given the level of demand and supply variability,” she said.

Differentiating supply chains: While most manufacturers talk about the supply chain as a unified system, Cecere encouraged participants to differentiate various kinds of supply chains from one another.

  • “We have responsive supply chains that are all about time—things like flu vaccines and bathing suits,” which must be shipped during certain seasons, Cecere observed.
  • “And then there’s the agile supply chain, which is very low volume and not predictable. We can’t measure that in the same way we measure the efficient supply chain, but we need to manage flow.”
  • “We don’t have just one supply chain. We have multiple supply chains,” she emphasized.

Putting customers at the center: As businesses design and adjust their supply chains, customers can get lost in the equation, Cecere cautioned. In one exercise she has used in her research, she asks participants to draw a supply chain—and the results she’s received show how many manufacturers are leaving out an important piece of the puzzle.

  • “Most people will start with a truck, smokestack, then a factory, a mill,” said Cecere. “But isn’t the supply chain really about the customer? And how do we align the customer from the customer’s customer to the supplier’s supplier? … The role of the supply chain is the delivery to the customer.”

Using data effectively: According to Cecere, about 80% of supply chain data is not used. She encourages manufacturers to look creatively at the wide range of data available to generate useful insights.

  • “We’re not looking at all the data we have, and we’re not thinking hard enough about how we use it,” she said.

Developing purple unicorns: Cecere encouraged participants to develop teams of “purple unicorns”—people with strong supply chain domain knowledge who can also innovate—and allow them to test new ideas and learn from failure.

The last word: “Supply chain excellence is not functional excellence—it is the ability to drive outcomes,” said Cecere. “This cannot be about the lowest cost; this has to be about the best potential of flow for cost, quality, customer service and inventory.”

Learn more: For more information, check out the full presentation here.

Input Stories

How Manufacturers Can Strengthen Supply Chains’ Resilience


Since the onset of COVID-19 in 2020, supply chains have faced extraordinary challenges around the world. In the midst of shortages and disruptions, as well as global conflicts, how can manufacturers ensure that they receive the materials they need and deliver their products on time?

At a recent NAM event, attended by more than 75 executives from both manufacturing companies and association partners, Supply Chain Insights Founder Lora Cecere addressed the question of how the industry can build resiliency into the supply chain of the future. Here’s some useful advice from her keynote speech, called “Supply Chain Workshop: Connecting and Securing the Supply Chain for 2030.”

Defining resilience: As Cecere noted, in many cases manufacturers may have different ideas about what resilience represents—and it’s important to settle on a clear definition.

  • “I define resilience as the ability to have the same cost quality and customer service given the level of demand and supply variability,” she said.

Differentiating supply chains: While most manufacturers talk about the supply chain as a unified system, Cecere encouraged participants to differentiate various kinds of supply chains from one another.

  • “We have responsive supply chains that are all about time—things like flu vaccines and bathing suits,” which must be shipped during certain seasons, Cecere observed.
  • “And then there’s the agile supply chain, which is very low volume and not predictable. We can’t measure that in the same way we measure the efficient supply chain, but we need to manage flow.”
  • “We don’t have just one supply chain. We have multiple supply chains,” she emphasized.

Learn more: To hear more from Cecere, attend “Manufacturing in 2030: The Coming Data Value Revolution,” an event of the NAM’s digital-transformation arm, the Manufacturing Leadership Council, Dec. 6-7 in Nashville, Tennessee. Register here.    

Read the full story here.
 

Input Stories

For Critical Minerals, Companies Look to Old Mines


In the push for more critical minerals, governments and companies worldwide are looking to “a new but also old source”: closed mines, or brownfield sites, The Wall Street Journal (subscription) reports.

What’s going on: “[O]pening new mines takes years—particularly when faced with strong local opposition—and delays might hamper policymakers’ efforts to diversify these supply chains. Even with recent investment announcements, analysts are forecasting supply shortfalls.”

  • Reopening shuttered mines is often a quicker and less painstaking process because it allows the companies to “avoid damaging new land and work with local communities that have a memory of economic activity the industry can bring,” as a source told the Journal.

A successful start: One Swedish mining company is seeking to reopen an old copper-and-zinc mine in Norway that closed 25 years ago owing to low copper prices. “Last month, the local municipality unanimously approved plans to reopen” the mine.

  • Several American firms are now seeking to reopen closed U.S. sites in the Southwest, and other projects are being planned in Italy and Germany.

​​​​​​​A “shift” in the U.S.: A U.S. company with plans to reopen an old gold mine in Idaho recently received funding from the Defense Department, which recognized the importance of the site as a source of antimony, a much-needed mineral in the defense sector.

  • “The shift we are seeing in the United States is a growing recognition that we must secure supply chains, and a way to do that is bringing mining home and that means getting the public comfortable to bring mining home,” an executive at the firm told the Journal.
View More